Best Heat Pump System Australia: What You Need to Know Before You Buy
If you’re considering a heat pump hot water system, you’re…
Choosing well now saves Mill Park households money for years.
Plenty of cheap systems fail early. We only install units we would put in our own homes, sized for your Mill Park household.
Honest advice on the right system for your Mill Park home, with a clear price upfront.
Homes in Mill Park are mostly a mix of established 1960s to 80s homes and brand-new estates. Being in Melbourne's northern suburbs, with growing families, we plan every Mill Park install around how the house is laid out and how much hot water the household really uses. If you need a hot water plumber in Mill Park, our licensed team specialises in heat pump hot water and solar hot water, and we still repair and replace gas and electric systems when that is the better fit.
Many Mill Park homes are on their second or third storage system, usually gas or off-peak electric. Electric storage tanks are one of the most expensive ways to heat water, so replacing one in Mill Park with a heat pump can make a real difference to the power bill.
Heat pumps work like a reverse air conditioner, pulling heat from the Mill Park air into the water. In Mill Park that typically means far lower running costs than gas or electric storage, and no gas connection to pay for. We also think about noise. A heat pump runs about as loud as a fridge, but on a Mill Park block we place it away from bedroom windows, yours and your neighbours'.
What we do for Mill Park homes:
With open, sunny roofs across much of Mill Park, solar hot water works well here. A good system can supply most of a Mill Park home's hot water from the sun, with a gas or electric booster for cloudy days.
Hot water gone cold, leaking or tripping the power? Call us. We repair electric, gas, solar and heat pump systems across Mill Park and Epping and Thomastown, and if replacing makes more sense we explain the options and costs first.
Rebates can take a good chunk off a heat pump or solar system. Tell us when you book and we will work out which programs apply to your Mill Park home.
Will a heat pump work through a Mill Park winter?
Yes. We choose models rated for the coldest nights Mill Park gets and set them to run in the warmer part of the day.
Can my solar panels run a heat pump in Mill Park?
Yes, and it is the cheapest way to run one. In Mill Park we programme the unit to run while your solar is generating, which cuts the running cost close to nothing on sunny days.
Is it worth repairing my old hot water system in Mill Park?
If the system is under about eight years old and the tank is not leaking, a repair is usually worth it. If the tank is leaking or rusted, replacing it is the only real fix, and we will tell you that straight away.
How long does a hot water replacement take in Mill Park?
A like-for-like replacement in Mill Park usually takes half a day. Changing from gas to a heat pump takes a full day because we cap the gas and may add a dedicated circuit.
Fixed quotes with no surprises. Heat pump and solar specialists, not just general plumbers, working from our base in Northcote. Help claiming every rebate you qualify for.
As well as Mill Park, we install and repair hot water systems in Wollert, Mernda and Thomastown.
Homes in Mill Park are mostly newer estates and family homes across the growth corridor, and that shapes which hot water system makes sense. Off Grid Plumbing works from our base in Northcote, and the job we do most here is heat pumps for new and near-new homes, and changeovers from builder-grade gas units.

We start by asking how your Mill Park household uses hot water, what you spend on energy now and whether you have solar. Then we explain the heat pump, solar and like-for-like options for your home and what each would cost.

Every Mill Park quote is fixed and itemised, with no hidden extras. We work out the rebates your home qualifies for and include them, so you can see the real cost up front.

Once you approve the quote, our licensed plumbers install your new system in Mill Park, test it, remove the old unit and show you how the timer and settings work.
For most Mill Park homes, yes. A heat pump can use up to 70% less energy than an electric storage unit, rebates bring the upfront cost down, and if you have solar the running cost drops even further.
It depends on the system and your situation. Most Mill Park homes replacing an older unit with a heat pump can claim small-scale technology certificates and Victorian Energy Upgrades discounts, and some also qualify for a Solar Victoria rebate. In the City of Whittlesea, many homes here already have rooftop solar to run a heat pump.
We suggest a service every 12 months. For Mill Park homes on hard or tank water it is worth checking the anode and valves at least that often.
Absolutely! Our licensed plumbers are experienced with electric, gas, solar, and heat pump systems. We carry out fast and reliable repairs to get your hot water back up and running quickly.
Most Mill Park installs are finished in a single day. A gas to heat pump changeover can take a little longer, and we will tell you the timeline when we quote.
Water leak fixed

Heat pump install

Leaking faucet replacement

Water tank install & solar hot water heater

Gas Leak Repair

Roof Repair

If you’re considering a heat pump hot water system, you’re…
When it comes to choosing an energy-efficient hot water system,…
Rainwater tanks are a popular way to collect and store…